VMP Performance

Supercharged lower intake manifold for Gen1 and Gen2 5.0 L Coyote engines with 3/4" intercooler lines PN: VMP-YORD-34 Looking for a way to install your VMP or Roush supercharger on a Gen1 or Gen2...

Use this gasket when you have high rpm and high boost throttle body closure issues. This is only a problem on Coyotes running over 20 psi and over 7000 rpm. Must use RTV with gasket to prevent it...

VMP Gen2R throttle body body gasket (stock bolt pattern) Green throttle body gasket for use with 2011+ 5.0L or GT500 VMP 2.3L TVS and twin 60, 65, 67 throttle bodies, as well as, Cobra Jet monoblade...

Use this adapter when you want to run a KB 168mm throttle body on your VMP Gen 3 supercharger. Adapts the stock GT500 style bolt pattern up to the large KB168 pattern. The outlet shape on the plate...

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

Green throttle body gasket for use with the original VMP Gen 3 TVS and VMP 160mm or 173mm throttle bodies. It also used with VMP adapter plate for earlier throttle bodies. This gasket is a custom...

Use this adapter when you want to run a KB 168 mm throttle body on your VMP Gen3R supercharger.? Adapts the stock GT500 style bolt pattern up to the large KB168 pattern.? The outlet shape on the...

Replacement gasket for VMP Gen 3R blower. Based on stock bolt pattern with an large inside opening of 162mm x 82mm elliptical 18sq in. Only for use with billet throttle bodies VMP, FRPP, etc. Will...

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

This adapter, made by VMP Performance, allows the use of a factory 2011-2017 Mustang GT throttle body on a GT350 manifold. Hardware included and o-ring included.

Supports 600+ RWHP in a 3 inch tubeRecommended for high horsepower blow-through applications: turbo, Hellion, Procharger, Vortech, Centrifugal, Paxton Easy to install, direct bolt-on application for...

Connector for 96+ IAT / ACT sensors. Includes 12 of wire. Can be used with threaded style sensor from Lightning/Cobra or push-in style sensors found on 96-00.To avoid potential problems this harness...

Replacement gasket for Kenne Bell 168mm throttle body. Based on custom bolt pattern with an opening of 168mm x 75mm oval 17.7sq in.

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

Required when installing aftermarket camshafts. The top port must be referenced to vacuum and boost as the boost source will close the BPV since it no longer has a return spring. The bottom port is...

The VMP Mult-pass heat exchanger can configured for single or dual pass operation depending on how it is plumbed. 1" NPT ports on both sides. Can be mounted in lower grill or upper grill. 11" spal...

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

VMP Performance Odin 10-Rib Pulley Hub Spacer 23.9mm/.940in