Sidebar
CARROLL SHELBY WHEELS CS5 - 19 X 11 IN. - 5 X 114.3 - 50MM OFFSET - GLOSS BLACK

CARROLL SHELBY WHEELS CS5 - 19 X 11 IN. - 5 X 114.3 - 50MM OFFSET - GLOSS BLACK

(No reviews yet) Write a Review
$389.95
SKU:
CS5-911550-B
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Due to the popularity of our forged CS21 made for the Shelby GT350, Carroll Shelby Wheel Company is happy to announce the CS5 - a wheel with the same great styling of the CS21 offered in standard Mustang fitments. Featuring sharp, elegant lines and flow-formed construction, the CS5 comes in 19x9.5 +34ET and 19x11 +50ET sizes. Independently tested in the USA to SAE J2530 safety and durability standards, the CS5 is not only light on weight - weighing in at only 23.5lbs front and 24.5lbs rear - but guaranteed strong. Available in Gunmetal, Gloss Black, and Chrome Powder finishes. Note: 2007-2014 GT500's will require a very small spacer to clear the face of the brake caliper.

Features:

  • Flow-Formed Construction - Stronger & Lighter than Traditional Cast Wheels
  • Fits 2005 & Up Mustang - Rear
  • Choose from 3 Finishes & 2 Sizes
  • Center Cap Included
  • Use with 9.5" Wide Front Wheels for Aggressive Staggered SetupApplication:
    • 2005-2020 Mustangs (DOES NOT FIT A 2016-2019 GT350/GT350R)
    Application Size BS in IN Offset/ET in MM Bolt Pattern in MM Hub in MM
    FRONT AND REAR 19x9.5 6.543" 34 5X114.3 73 mm
    REAR ONLY 19x11 7.925" 50 5X114.3 73 mm
    Note: 19 x 11 wheel designed for rear application and may requirer a Watts Link for 2005-2014 Mustang

    Note: Purchase of aftermarket lug nuts required. The stock lug nuts will not work.

Note: 19 x 11 wheel designed for rear application and may requirer a Watts Link for 2005-2014 Mustang

Note: Purchase of aftermarket lug nuts required. The stock lug nuts will not work.

DUE TO THE MANY BRAKE PACKAGES AND CONFIGURATIONS, THESE WHEELS MAY NOT CLEAR THE CALIPERS IF YOU HAVE AN EXTREME AFTERMARKET/PERFORMANCE BRAKE SYSTEM AND/OR MAY REQUIRE WHEEL SPACER.

 

IT IS ULTIMATELY THE RESPONSIBILITY OF THE INSTALLER TO INSURE PROPER CLEARANCE TO THE BRAKING SYSTEM, SUSPENSION, AND WHEEL WELLS, AND THAT THE WHEEL DOES NOT CAUSE DAMAGE TO THESE COMPONENTS (OR ANY COMPONENTS) OR THE WHEEL ITSELF.

!