Edelbrock

Edelbrock part #71233 Performer 5.0 RPM II intake manifold for 1986-95 5.0L Mustang engines has shown significant gains in horsepower over existing designs in the 1500 to 6500 rpm range, and is...

Edelbrock part #75213 RPM Air-Gap intake manifold is designed for street 289 302-347 c.i.d. Ford V8's. The RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor...

The Edelbrock #9718 Intake Valve Seat is a replacement for Edelbrock Ford FE Cylinder Heads with 2.09" Intake Valves. Set of 1

Performer Carburetor Calibration Kit #1487 for #1406 Carburetors

Edelbrock part #9705 Performer RPM lifter set for B/B Ford FE is designed for use with Edelbrock Performer RPM or equivalent camshafts. Sold in complete sets.

Edelbrock part #97393 high performance hydraulic roller lifters for FE Ford are the perfect match for street and high performance applications. With unsurpassed tolerance capable of high rpm power,...

The Edelbrock #2036 RPM Dual-Quad manifold and carb kit is designed for 390-428 Big-Block Ford FE applications. A huge hit among street rodders, this Dual-Quad Kits offer the ultimate set-up for...

The Edelbrock #2033 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best...

The Edelbrock #2034 Single-Quad Manifold and carb kit is designed for Small-Block Ford 351-W applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best...

The Edelbrock #2037 Single-Quad Manifold and carb kit is designed for Big-Block Ford FE applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best...

The Edelbrock #2032 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best...

The Edelbrock #2031 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best...

The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking...

Edelbrock part #21211 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Will not fit Boss 302 or 255 c.i.d. V8's. Edelbrock carbs will work with Ford...

Edelbrock Performer-Plus Camshaft #2122 is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with...

Edelbrock part #2172 Performer-Plus camshaft is designed for Ford 351M-400 V-8 applications. This Edelbrock cam kit produced 390 ft-lbs. of torque when used with #2171 intake and stock iron cylinder...

Edelbrock part #2182 Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with #2181 intake and stock iron...

Edelbrock Performer-Plus Camshaft #2167 is designed for 429-460 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer...

Edelbrock Performer-Plus Camshaft #2106 is designed for 352-428 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer...

Edelbrock Rollin' Thunder Camshaft #3722 is designed for 5.0L Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds...