US Dollar
Engine Components
Sub Categories
Ford Racing
Ford Racing 8.8inch Ring Gear Bolt Set - M-4216-A300
$16.00
these Ford Racing flywheel bolts allow you to bolt in your flywheel with confidence. They are a stock replacement part, so you can be sure that they'll fit your Ford engine with manual transmission flywheels.
Ford Racing
Ford Racing 96-10 Mustang 4.6L (SOHC/DOHC) A/C Eliminator Kit - M-19216-D46
$88.00
These Ford Racing air conditioning eliminator kits are just the ticket for taking off unwanted front-end weight. Lightening the front of your vehicle improves rear weight transfer and reduces ETs, and it's never been easier to do than with these...
Ford Racing
Ford Racing 5.0L TI-VCT High RPM Competition Pulse Ring - M-12A227-CJ13
$140.00
Ford Racing high-rpm ignition pulse rings power up your Ti-VCT engine. These pulse rings are modified to support higher rpm engine builds and extend rpm range from 7,700 to 8,100 rpm. Do you need parts for your Ford? The best and only choice should be...
Eagle
Eagle Ford 302 Standard I-Beam Connecting Rods (Set of 8) - SIR5090FP
$360.99
Eagle's commitment to quality and service has resulted in customer loyalty and satisfaction. This, in turn, has fueled rapid growth over the years. Eagle added crankshafts to our lineup a few years later as well as expanding our offerings in Connecting...
Eagle
Eagle Ford 5.4 H-Beam Connecting Rods (Set of 8) - CRS6657F3D
$818.99
Forged 4340 steel H-Beam connecting rods are forged from a two-piece forging and feature a fully machined and shot-peened surface. Sizing is held to exact tolerances. Sold as a weight-matched set. Recommended for competition use.
Eagle
Eagle Ford 302 Forged 4340 Steel H-Beam Connecting Rods (Set of 8) - CRS5090F3D
$692.99
Forged 4340 steel H-Beam connecting rods are forged from a two-piece forging and feature a fully machined and shot-peened surface. Sizing is held to exact tolerances. Sold as a weight-matched set. Recommended for competition use.
Eagle
Eagle Ford 4.6L 3 Valve Heads Rotating Assembly Kit - 5.950in H-Beam Standard Bore - 16414000
$2,380.99
3.750" Cast Crank, 5.950" H-BEAM Rods,3/8" ARP 8740 BOLTS,Forged 2618 ARIAS -19CC INVERTED DOME 3.572" PISTONS, PLASMA-MOLY FILE-FIT RINGS,CLEVITE P Rod/MAIN BEARINGS.
Eagle
Eagle Ford 4.6L 3-Valve Heads Rotating Assembly Kit with 5.950in H-Beam - +.020 Bore - 14414020
$3,136.99
3.750" Forged 4340 Steel Crank, 5.950" H-BEAM Rods,3/8" ARP 2000 BOLTS,Forged 2618 ARIAS -19CC INVERTED DOME 3.592" PISTONS, PLASMA-MOLY FILE-FIT RINGS,CLEVITE H Rod/MAIN BEARINGS.
Eagle
Eagle Ford 4.6L 3-Valve Heads Rotating Assembly Kit with 5.950in H-Beam - Standard Bore - 14414000
$3,136.99
3.750" Forged 4340 Steel Crank, 5.950" H-BEAM Rods,3/8" ARP 2000 BOLTS,Forged 2618 ARIAS -19CC INVERTED DOME 3.572" PISTONS, PLASMA-MOLY FILE-FIT RINGS,CLEVITE H Rod/MAIN BEARINGS.
Eagle
Eagle Ford 4.6L 3V 5.950in H-Beam +.020 Bore -8cc Dome 3.750in Stroke Rotating Assembly Kit - 14413020
$3,246.99
Eagle Competition Rotating Assemblies are perfect for all forms of racing use including nitrous and forced-induction.
Eagle
Eagle Ford 4.6L 3-Valve Heads Rotating Assembly Kit with 5.933in H-Beam - +.020 Bore - 14410020
$3,246.99
3.554" Forged 4340 Steel Crank, 5.933" H-BEAM Rods,3/8" ARP 2000 BOLTS,Forged 2618 ARIAS -17CC INVERTED DOME 3.592" PISTONS, PLASMA-MOLY FILE-FIT RINGS,CLEVITE H Rod/MAIN BEARINGS.
COMP Cams
COMP Cams Steel Retainers 3-Valve Ford - 710-24
$124.95
Precision machined from chromemoly steel then black oxided, these 7 degree retainers are designed specifically for 26113/26125 Beehive springs on Ford 4.6 3 Valve applications.
COMP Cams
COMP Cams Steel Retainers 3-Valve Ford - 710-100
$429.95
Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams steel retainers are precision machined from chromemoly steel and finished in black oxide. These precision retainers are specifically...
COMP Cams
COMP Cams Steel Retainer 3-Valve Ford 4 - 710-1
$11.95
With precision machined steel billet gears, our keyway timing set for Chevrolet 454-502 GEN VI Big Block is built with bullet-proof durability. Features 9 keyway crank sprocket for 2 degree adjustment increments and double roller chain.
COMP Cams
COMP Cams 11-14 Ford Coyote/Boss 5.0L .600in Max Lift Valve Spring Kit - 26125CTS-KIT
$1,003.95
Designed for '11-'14 and '15+ 5.0L Coyote and Boss engines, this beehive spring kit offers increased valve control at high RPM while allowing for higher valve lift from performance cams. Includes tool steel retainers, seals and seats.
COMP Cams
COMP Cams 11-14 Ford Coyote/Boss 5.0L .600in Max Lift Valve Spring Kit w/ Ti Retainers - 26125CTI-KIT
$1,298.95
Designed for '11-'14 and '15+ 5.0L Coyote and Boss engines, this beehive spring kit offers increased valve control at high RPM while allowing for higher valve lift from performance cams. Includes titanium retainers, seals and seats.
COMP Cams
COMP Cams Ford 5.0L Coyote Valve Spring Kit O.D. .959in - 26113CY-KIT
$704.95
Designed for '11-'14 and '15+ 5.0L Coyote and Boss engines, this beehive spring kit offers increased valve control at high RPM while allowing for higher valve lift from performance cams. Includes properly matched retainers, seals and seats.
COMP Cams
COMP Cams Finishing Kit SBF 5.0L Engine - 243
$33.95
This engine finishing kit includes the parts to complete your engine. The Ford 5.0 kit includes 4 head dowels, 2 timing cover dowels, 1 cam bolt/washer, thrust plate bolts, spider tray bolts, 2 woodruff keys and cam sprocket dowel.
COMP Cams
COMP Cams Camshaft Set 11-14 Ford Coyote 5.0L M Thumpr - 191710
$2,044.95
See 191700 for Thumpr NSR Cams for '11-'14 Ford 5.0L Coyote, See 243700 for Thumpr NSR Cams for '15-'17 Ford 5.0L Coyote, See 243710 for Mutha' Thumpr NSR Cams for '11-'14 Ford 5.0L Coyote.
COMP Cams
COMP Cams Camshaft Set 11-14 Ford Coyote 5.0L Thumpr - 191700
$2,013.95
Lincoln: Mark LT 11 - 14 5 L Engine, Ford: Lobo 11 - 14 5 L Engine, Ford: F-150 11 - 14 5 L Engine, Ford: Mustang 11 - 14 5 L Engine